Service 09 / 10 · Band saws · −45° to +60°

Band saw cutting CNC cutting of bars, profiles, tubes, and round bars — at angles from −45° to +60°

Looking for a supplier to cut bars, profiles, and tubes to length — straight or angled, in series or as a one-off order? At ADJATECH we perform band saw cutting on automatic band saws with a rotating arm (angle from −45° to +60°) as well as on semi-automatic and vertical saws. We cut bars up to Ø 250 mm and material up to 6 m long — in black steel, stainless steel, aluminum, brass, and bronze — and the cut pieces can go straight to turning or milling in the same shop.

Cutting angle−45° to +60°Diameterbars up to Ø250 mmLengthmaterial up to 6 m

Get a saw cutting quoteCall: +48 531 541 003

Band saw cutting of steel round bar — ADJATECH automatic band saw with the arm set at an angle
Band saw · angled arm

Service parameters

Band saw cutting services at ADJATECH — saws, ranges, and key parameters

The saw cutting department runs automatic band saws with a rotating arm that cut in both directions from −45° to +60°, as well as semi-automatic and vertical band saws. We handle bars up to Ø 250 mm in diameter and material up to 6 m long. The cooling systems in the cutting zone produce a smooth, burr-free end face without overheating the material.

We cut for the machinery, construction and automotive industries, as well as for individual customers. Prototypes and series runs go through the same saws, and the cut pieces can move straight on to turning and milling in the same facility, with no change of supplier and no transport between companies.

  • Machine building
  • Manufacturing and assembly
  • Construction and steel structures
  • Automotive
  • Workshops and prototype shops
  • Individual customers
Saw cutting · parameter sheetJanikowo near Poznań
01Cutoff saws
Automatic · semi-automatic · verticalautomatic band saws with a swivel arm, semi-automatic band saws and vertical saws
02Cutting angle
−45° to +60°saw arm swivels both ways — miter cutting of bars, profiles and tubes without repositioning the material
03Bar diameter
up to Ø 250 mmsolid bars and round bars; tubes and profiles with round, square and rectangular cross-sections
04Material length
up to 6 mbars and profiles in standard stock lengths; cutting to size according to your cutting list
05Materials
Steel · stainless steel · aluminumas well as stainless steel, brass, bronze, nonferrous metals and special alloys — your material or ours
06Lead time
By arrangementwe set the lead time based on the material and number of pieces, and provide it with the quote

Facility in Janikowo · orders fulfilled across Poland

01 · Scope of service

CNC band saw cutting in Poland — bars, profiles, tubes and round bars in series and one-off orders

Our saw cutting department operates in Janikowo near Poznań, in the same shop as our automatic lathes and machining centers. We cut material to size for companies from Greater Poland and all over Poland — in series and for single orders.

Our specialty is CNC band saw cutting of bars, profiles, tubes and round bar. We offer it as a standalone order and as the first step of CNC machining. We operate automatic band saws with a rotating arm that cut in both directions from −45° to +60°, plus semi-automatic and vertical saws. We cut bars up to Ø 250 mm in diameter and material up to 6 m long, and we select the parameters (blade speed, feed rate and cooling) for the grade and cross-section. Prototypes and series runs are produced on the same machines: a single piece and a batch of several hundred have the same dimensions and the same end-face quality.

Cutting bars, profiles, tubes and round bars — what do we cut?

  • Round, square and hexagonal bars: blanks for turning and milling, cut with an allowance or to finished length.
  • Round bar in steel and stainless steel: pieces of repeatable length, with the end face square to the axis.
  • Closed and open profiles: square and rectangular sections, angles and channels, also mitered for frames and structures.
  • Steel, stainless steel and aluminum tubes: straight and angled cuts without crushing the wall.
  • Flat bars and blank material: pieces for further machining on CNC centers.

What do you get with our band saw cutting service?

  • Pieces cut to length according to your cutting list: straight or angled, from our own or customer-supplied material.
  • A quote per piece and per full set, with notes from our process engineer if the cross-section, angle or allowance is worth changing before production starts.
  • Lead time agreed individually: always confirmed with you and provided together with the quote.
  • Further machining under one roof: turning, milling, grinding and engraving, plus coatings within the same order.

Saw cutting in Poznań, Greater Poland, and all of Poland

Our shop is located in Janikowo near Poznań, so customers from Poznań and Greater Poland often deliver material and collect the cut pieces in person. Companies from other regions of Poland send their cutting list through the quote form and receive the finished parts by courier in protective packaging.

CNC band saw cutting at ADJATECH — saw blade sunk into a steel bar, chips on the sawing machine table
CNC saw cutting · bars and rounds

02 · Sawing machines and parameters

Metal cutting at angles from −45° to +60° — automatic band sawing machines, bars up to Ø250 mm and material up to 6 m

The rotating saw arm cuts miters in both directions without repositioning the material, and the cutting zone cooling system produces a smooth, burr-free end face without overheating — in a series just as in a single piece.

Automatic band sawing machines with a rotating arm

The department is built around automatic band saws whose saw arm swivels in both directions from −45° to +60°. What does this mean in practice? We clamp the profile or bar once and make the following cuts, straight and angled, left and right, without turning the material over in the vise. This shortens lead time and eliminates the angle error that is hard to control when long parts are repositioned by hand. The saws handle bars up to Ø 250 mm in diameter and material up to 6 m long, so we cut full commercial lengths without pre-cutting.

Semi-automatic band sawing machines and vertical band saws

Not every order calls for an automatic saw. Semi-automatic band saws handle single pieces, unusual cross-sections and short runs where setting up an automatic machine would not be justified, while vertical saws handle parts that cannot be clamped in the vise of a horizontal saw. This lets us adapt the process to the order: we cut steel tubes, aluminum profiles and angled pieces for structures on whichever machine gives the best result for the given cross-section and quantity.

Cutting zone cooling — no burrs, no overheating

Our saws are equipped with cooling systems that carry heat away from the cutting zone. The material does not overheat, the blade stays sharp, and the end face is smooth and free of burrs, so pieces can go straight into a lathe chuck or be assembled into a frame. We select the band saw parameters (blade speed, feed rate, clamping pressure and tooth pitch) for the material: stainless steel, aluminum and brass each need a different approach. You will find a summary of the department's parameters in the table below.

You give the cutting angle as you read it on the drawing — the technologist converts it into the arm setting. For frames and structures, send an assembly drawing: we will check whether the cut pieces fit together at the corners.

Saw blade cutting a steel round bar — ADJATECH automatic band sawing machine, cutting rounds and bars up to Ø250 mm
Steel round bar · bars up to Ø250 mm

Band saw cutting parameters at ADJATECH — table

Band saw cutting parameters at ADJATECH — machines, ranges, and materials
ParameterValueFeedback
Automatic sawing machinesband type, with a rotating armstraight and angled cutting in both directions; series of pieces with repeatable length
Cutting angle−45° to +60°saw arm rotation in both directions — miter cutting without repositioning the material in the vise
Maximum bar diameterØ 250 mmsolid bars and rounds; tubes and profiles within the machine's capacity
Input material lengthup to 6 mbars, profiles, and tubes in commercial lengths, without prior division
Semi-automatic cutting machinesband sawssingle pieces, unusual cross-sections and short runs
Vertical sawsband sawsparts that cannot be clamped in the vise of a horizontal saw
Coolingcutting zone cooling systemno material overheating, burr-free end faces, longer blade life
Materialsblack steel · stainless steel · acid-resistant steel · aluminum · brass · bronzeother non-ferrous metals and special alloys as well — we confirm the grade before starting
Materialour own or customer-suppliedbefore cutting, we check the grade, dimensions and surface condition
Lead timeby arrangementset according to the material and number of pieces, provided with the quote

Automatic, semi-automatic and vertical saws · angled cutting from −45° to +60° · bars up to Ø 250 mm · material up to 6 m · in the same facility: CNC automatic lathes, 3- and 5-axis machining centers and a measurement station

03 · Materials

Saw cutting of stainless steel and aluminum — as well as black steel, acid-resistant steel, brass, bronze and special alloys

We don't limit ourselves to the most common grades. We cut every material with parameters matched to its properties — from material in our own stock or supplied by the customer.

What materials can we cut for you?

We accept orders for cutting black steel, stainless steel and acid-resistant steel, aluminum, brass and bronze. Our experience also lets us handle other nonferrous metals and special alloys that require a slower feed rate, a different blade tooth pitch and intensive cooling. We confirm the grade before starting, since it determines the cutting parameters and the price. Sheet metal and flat parts are cut with a different technology: on fiber laser cutting machines in the same facility.

Band saw cutting of steel — black, stainless and acid-resistant

We perform saw cutting of stainless steel with a constant, even feed rate and generous cooling, because stainless and acid-resistant steels work-harden when cut too slowly and quickly dull the blade. The result is an even end face without burn marks or burrs, which matters for round bar destined for turning and for valve components. We cut black (structural) steel across the full range of cross-sections: bars up to Ø 250 mm, profiles and tubes for structures, and blanks for milling.

Saw cutting of aluminum, brass, bronze and non-ferrous metals

Band saw cutting of aluminum requires a blade with a coarser tooth pitch and cooling that prevents chips from clogging the teeth. The end face then stays clean and the piece needs no rework. Brass and bronze machine well and give an even, smooth cut; they are the materials for bushings, bearing shells and fittings that go on to automatic lathes after cutting. We treat each of these materials individually, adjusting blade speed, feed rate and clamping pressure to its characteristics.

Your material or ours?

We cut both material from our own stock and bars, profiles and tubes supplied by the customer. We start every order with customer-supplied material by checking the grade, dimensions and surface condition — these determine the cutting parameters, machining allowances and process safety. If the material does not allow the dimension from the cutting list to be achieved, we tell you before we start, not after.

ADJATECH material warehouse — racks with steel, stainless steel and aluminum bars, profiles and tubes for saw cutting
Warehouse · bars, profiles and tubes

04 · Blanks for machining

Steel cut to length as blanks for turning and milling — cutting to size in a single facility

Most pieces are not final products for us. We cut bars, profiles and tubes for further machining and pass them to the CNC lathes and machining centers a few meters away — with no transport between companies.

Cut-to-Length Sawing Before CNC Machining

Cutting steel to length is the first step for most turned and milled parts. We cut the bar or profile with an allowance agreed with the machining process engineer, so the piece fits straight into the lathe chuck or the vise of the machining center. The end face after band saw cutting is square and burr-free, so facing removes a minimum of material and time. Blanks cut from bars up to Ø 250 mm go to turning on 4 CNC automatic lathes and 3 conventional lathes, while pieces of profiles and flat bars go to milling on 3- and 5-axis centers.

A full range of services under one roof — from bar to measured part

We carry out cutting, turning, milling, grinding and engraving under one roof, and coatings within the same order — all based on the same documentation. For you, this means one contractor responsible for the final dimension, one quote and one deadline — instead of coordinating several subcontractors and transporting long bars between them. We check finished products at the measuring station in the same hall: see inspection of finished parts.

  • Bar → shaft: a cut piece, turning on a CNC automatic lathe, surface grinding.
  • Profile → frame: pieces mitered in both directions that meet at the frame corners.
  • Flat bar → mounting plate: cutting to length, milling of surfaces, holes and threads.
  • Tube → spacer sleeve: a series of pieces of repeatable length, chamfering and marking.

Production runs and one-off orders on the same saws

Automatic saws repeat the piece length across the entire batch, so series cutting to length of hundreds of pieces is as accurate as the first piece. We send single pieces and unusual cross-sections to the semi-automatic and vertical saws. You can see examples of parts that began with saw cutting in our projects.

ADJATECH production hall with CNC machines — saw-cut blanks go to turning and milling in the same facility
One facility · saw, lathes, CNC centers

05 · Why choose us

Why CNC band saw cutting? Repeatability, no burrs and dimensional control

Tired of compromises and mediocre solutions? So are we. Automated cutting eliminates measurement errors, coolant protects the material, and we check the dimension in-house — before the piece moves on.

CNC saw cutting is not only about precision, but also about efficiency and material savings. Process automation — programmed piece length, feed and arm angle — eliminates measurement errors and ensures every cut is repeatable, which is essential in series and industrial production. The narrow kerf of the band blade limits material loss, and metal band saws also let us take on non-standard orders: long profiles, large-diameter bars and angled cuts in both directions.

Advantages of CNC band saw cutting — what you gain

  • Repeatable length across a series — every piece from the same program and the same stop.
  • Burr-free cut face — cooling of the cutting zone and a matched blade tooth pitch; pieces are ready to clamp in a chuck.
  • Angled cutting from −45° to +60° — mitered pieces of profiles and tubes without repositioning the material.
  • Large cross-sections — bars up to Ø 250 mm and material up to 6 m long.
  • Less material waste — narrow blade kerf and pieces nested along the entire length of the bar.
  • The whole part from one contractor — after cutting, turning, milling and grinding in the same hall, and coatings within the same order.

CNC saw cutting services that meet your expectations

CNC saw cutting of stainless steel gives clean edges, no burrs and a result matched to your project requirements; we cut aluminum and nonferrous metals with parameters selected for their specific properties; saws with a rotating arm make angle cuts across the full range. Pricing is individual — it depends on the material, cross-section, number of pieces and angle — and we confirm the lead time once details are agreed and state it together with the price. Our approach is based on analyzing the customer's needs: if changing the allowance or the cutting sequence will lower the cost, we propose it before starting.

Dimensional inspection

We check the length and angle of the first pieces before starting the series, and measure parts after further machining at the measuring station in the same hall.

06 · Industries and applications

Cutting tubes, profiles and bars for industry, construction and automotive — who do we cut for?

Our saw cutting services go to manufacturing, structural and automotive companies, to workshops and to individual customers. We run every project, from a single piece to a full series, with the same accuracy.

Band saw cutting is used both by plants that need blanks for their own machining and by companies for which the cut piece is a finished structural component. We most often work for several groups of customers, each with different requirements for cross-section, angle and quantity.

  • Machinery and manufacturing — blanks from bars and profiles for turning and milling, series of pieces with repeatable length.
  • Construction and steel structures — profiles, tubes and angles cut straight and mitered for frames, railings, brackets and substructures.
  • Automotive — shafts, bushings and mounting components made of steel, stainless steel and aluminum; prototype and series on the same machines.
  • Workshops, design offices and individual customers — single pieces, unusual cross-sections and cutting of customer-supplied material.

Angled cutting of steel tubes and aluminum profiles

Tubes and hollow sections require stable clamping and a blade band matched to the wall thickness—otherwise the cut crushes the cross-section or leaves burrs inside. Our automatic miter saws with a rotating arm cut them straight and at angles from −45° to +60°, so frame sections meet at the corners without additional fitting.

How do I order CNC saw cutting?

Ordering is simple: send your cutting list through the form on the website, call us or send an e-mail—you'll find the contact details on the contact page. We'll prepare an individual saw cutting quote based on the material, cross-section and number of pieces, and we'll give you the lead time with it. Whether you are a manufacturing, construction or automotive company or an individual customer, the order process is described below.

Order process

How to Order Band Saw Cutting: From Cutting List to Cut Pieces

We keep the order process simple: cutting list, selection of material and saw, quote with lead time, cutting and inspection. At every stage you talk to a technologist from the machining department.

  1. Your move

    Send your cutting list

    Specify the material and grade, cross-section (bar, tube, profile, round bar), dimensions, piece lengths, cutting angle and quantity—as a cutting list, a PDF or DXF drawing or a description in an e-mail. If you only have a sketch, we'll help you put it in order.

  2. What we do

    Material, saw, and quote

    Our technologist checks material availability in stock or accepts customer-supplied material, selects the saw and the cutting allowance, and then prepares a quote per piece and per set. We provide the lead time together with the quote — always agreed with you beforehand.

  3. What we do

    Cutting and inspection

    Once you approve the quote, we cut on automatic or semi-automatic band saws with coolant applied to the cutting zone. We check the length and angle of the first pieces and, on request, pass them on to turning, milling, grinding, or coating.

  4. Your move

    Pickup or shipping

    We pack the cut pieces and ship them by courier, or make them available for pickup in Janikowo near Poznań, Mon–Fri 8:30 AM–4:30 PM. We agree on the delivery method for longer parts when quoting.

Send your cutting list for a quoteContact details

Questions and answers

FAQ — frequently asked questions about band saw cutting and CNC

Twelve answers that clear up the start of our cooperation: ranges, materials, angles, prices, and the differences between a band saw, a circular saw, and a laser. Didn't find your question? Call our machining department or write to us.

Send your cutting list for a quoteAsk your own question

What is CNC saw cutting?

CNC saw cutting is the cutting of bars, profiles, tubes, and shafts on automatic band saws, where the piece length, feed, and arm angle are programmed rather than set by hand for every cut. This gives accurate, repeatable results — which is essential in series and industrial production — and cuts at different angles are made without repositioning the material. Coolant in the cutting zone produces a smooth end face and minimizes material loss.

Which metals can be cut on a CNC saw?

We cut carbon steel, stainless and acid-resistant steel, aluminum, brass, bronze, and other nonferrous metals and special alloys that require a slower feed and intensive cooling. Whatever the material, we select the blade tooth pitch, speed, and clamping pressure so that the cut face is even and free of burrs. We do not cut sheet metal with a saw — flat parts are cut on a fiber laser in the same facility.

How much does CNC saw cutting of metals cost?

The cost depends on the type of material and whether it is ours or customer-supplied, on the cross-section and diameter, the number of pieces, the cutting angle, and the required allowance. We do not publish a price list for band saw cutting — we quote each order individually based on your cutting list, and our reply includes the price per piece and per set, along with the lead time. For series, the machine setup cost is spread across the whole batch, so the unit price goes down.

Is CNC saw cutting precise?

Yes. Automatic band saws repeat the programmed piece length across the whole batch, and the rotating arm sets the angle anywhere from −45° to +60° without manual repositioning of the material. Cooling systems protect the material from overheating and the blade from dulling, so the cut face is smooth and square to the axis. We check the length and angle of the first pieces before starting a series; critical dimensions are agreed at the quoting stage.

How long does order fulfillment take?

We set the lead time individually — it depends on the material and its availability, the number of pieces, the cutting angle, and whether the pieces will go on to further machining. We give a specific lead time together with the quote, always agreed with you beforehand, and we keep to the agreed dates. Larger batches and orders combined with turning or milling are planned jointly with the customer, with the schedule matched to their production.

What is the maximum bar diameter you can cut?

On our automatic band saws we cut bars up to 250 mm in diameter, and the input material can be up to 6 m long — so we cut full commercial lengths without prior splitting. We accept profiles and tubes within the saw's capacity; for unusual cross-sections or larger dimensions, write to us — we will check which machine can make the cut, or propose another technology.

Do you cut profiles and tubes at an angle?

Yes. Our automatic band saws have a rotating saw arm that cuts in both directions within a range of −45° to +60°. We clamp the profile or tube once and make consecutive miter cuts without turning the material over, so the angle is repeatable and frame segments meet cleanly at the corners. Give the angle as you read it on the drawing — our technologist will convert it into the machine setting.

Do you cut customer-supplied material?

Yes. We work with material from our own stock as well as with bars, profiles, and tubes supplied by the customer. Before cutting, we check the grade, dimensions, and surface condition of customer-supplied material, because the cutting parameters and process safety depend on them. You can deliver the material in person to our facility in Janikowo near Poznań (Mon–Fri 8:30 AM–4:30 PM) or send it by courier.

Can I order bars cut to length with delivery?

Yes. We cut bars, profiles, and tubes to length according to your cutting list — from our own or customer-supplied material — and ship the pieces by courier in protected packaging to customers throughout Poland, including Warsaw, Wrocław, Łódź, and the Tri-City area. We agree on the delivery method and cost for longer parts when quoting; personal pickup in Janikowo near Poznań is also possible.

What is the difference between band saw cutting and laser cutting?

They are two technologies for different input materials. A fiber laser cuts contours from sheet metal — flat sheets 0.5–25 mm thick — and produces any geometry in the plane. A band saw cuts bars, profiles, tubes, and shafts into pieces, straight or at an angle, at diameters of up to 250 mm that a laser cannot cut. At ADJATECH both technologies operate in one facility, so you can order the sheet and bar stock for a single part from one supplier.

What is the difference between band saw cutting and circular saw cutting?

A band saw cuts with a continuous blade driven around wheels — it has a narrow kerf, low material loss, and cuts solid bars of large diameters, up to 250 mm in our case. A circular saw cuts with a rotating blade; it works well for thin-walled profiles and small cross-sections where a very smooth cut face matters, but the blade's reach limits the diameter. Band saws — automatic, semi-automatic, and vertical — are the core of our department; our technologist selects the method based on the cross-section and material.

What band saw cutting parameters do you select for the material?

For each grade and cross-section we select the blade speed, feed, clamping pressure, and tooth pitch. We cut stainless and acid-resistant steel with a steady, even feed and plenty of coolant so that it does not work-harden or dull the blade; aluminum with a coarser-toothed blade that does not clog with chips; brass and bronze for a smooth, even cut face. Tubes and profiles require stable clamping and a blade matched to the wall thickness. When an order is repeated, we use the same parameters, so the next batch looks exactly the same.

Quote

Get a quote for band saw cutting — we will reply with a price and lead time

Send your cutting list or drawing: material, cross-section, piece lengths, angle, and quantity. Your inquiry goes directly to our machining department — we reply during business hours, not through a front desk.

Working hours Mon–Fri 8:30 AM–4:30 PMFacility Janikowo near PoznańCoverage all of Poland