Service 07 / 10 · CNC grinders · polishing

Metal grinding and polishing — stainless steel, aluminum and brass, from matte to mirror finish

Looking for a supplier who can bring a surface to the dimensions and finish specified on the drawing? At ADJATECH, we provide metal grinding and polishing on CNC grinding machines for flat and cylindrical surfaces, belt and disc grinders, semi-automatic polishing machines and robotic grinding and polishing systems; small parts are vibratory polished. Stainless steel, aluminum, brass and bronze — from matte to mirror finish, including preparation for painting, chrome plating and gold plating.

Finishmatte · satin · mirrorCNC grindersflat surfaces · shaftsCoating preppaint · chrome · gold

Get a quote for grinding and polishingCall: +48 531 541 003

Metal grinding and polishing at ADJATECH — grinding a steel shaft on a grinder, a stream of sparks over the part
Shaft grinding · cylindrical surfaces

Service parameters

Metal grinding and polishing at ADJATECH — machine fleet and key specifications

We perform grinding and polishing on CNC grinding machines for flat and cylindrical surfaces, belt and disc grinders, and at polishing stations: manual, semi-automatic and robotic grinding and polishing systems. Small and complex parts are vibratory polished. This lets us fit the process to the part, not the part to the machine.

We grind and polish parts for the automotive, medical and aerospace industries and for tool manufacturers. Prototypes and series production run on the same machines, so the surface standard approved on the first piece applies to the entire batch.

  • Automotive
  • Medicine
  • Aerospace
  • Tool manufacturing
  • Machine building
  • Decorative parts
Grinding and polishing · parameter sheetJanikowo near Poznań
01CNC grinders
Flat surfaces · cylindrical surfacesCNC grinding of flat surfaces and shafts — the same dimensions and appearance across the entire series
02Grinders
Belt · discedges, flat surfaces and profiles; cutting and welding marks; we also wet-grind aluminum
03Polishing
Manual · semi-automatic · robotic · vibratoryhand polishers for hard-to-reach areas, semi-automatic polishing machines and robots for series production, vibratory polishing of small parts
04Materials
Stainless steel · aluminum · brass · bronzeas well as carbon steel, acid-resistant steel, duralumin and non-ferrous metals — parts from our own production or supplied by you
05Finish
Matte · satin · mirrorand surface preparation for painting, copper plating, chrome plating and gold plating
06Lead time
By arrangementwe set the lead time based on quantity and finish level, and provide it together with the quote

Facility in Janikowo · orders fulfilled across Poland

01 · Scope of service

Metal grinding services in Poland — grinding and polishing of stainless steel, aluminum, brass and bronze

From matte to mirror: surface finishing for industrial series and one-off projects, done in the same shop as milling, turning and laser cutting — in Janikowo near Poznań, with shipping throughout Poland.

Looking for a consistent, repeatable surface finish for your products? Metal grinding and polishing is one of the services of the machining department at ADJATECH. We process stainless steel, aluminum, brass and bronze, as well as carbon steel, acid-resistant steel, duralumin and non-ferrous metals. Our machine park includes belt and disc grinders, CNC grinding machines for flat and cylindrical surfaces, manual polishers, semi-automatic polishing machines and robotic grinding and polishing systems, complemented by vibratory polishing. This lets us fit the process to the part, not the part to the machine.

Our plant is located in Janikowo near Poznań, but we perform grinding and polishing for companies from all over Poland. Parts reach us by courier or go to the grinders straight from our machining centers and laser cutters; you can collect finished parts in person, or we will ship them in protective packaging to wherever you need them.

What does metal grinding and polishing include?

  • Surface and cylindrical grinding on CNC grinding machines — datum surfaces, journals and sleeves after turning and milling, with repeatability across the entire series.
  • Belt and disc grinding of edges, flat surfaces and profiles — removal of cutting and welding marks, deburring, matte or satin finish.
  • Polishing of stainless steel and aluminum to a high gloss — by hand, on semi-automatic polishing machines or in robotic systems.
  • Vibratory polishing of small and complex parts, including recesses and hard-to-reach areas.
  • Surface preparation for painting, copper plating, chrome plating, and gold plating.

Grinding of laser-cut blanks and CNC-machined parts — one shop, one point of responsibility

Many parts go to grinding straight from our own machines: after laser cutting, we even out the edges and flat surfaces of sheet metal, and we bring turned and milled parts to the dimensions and finish specified in the drawing. Prototypes and production runs are made on the same machines, so the surface standard approved on the first piece applies to the entire batch. You can see examples of finishes in our projects.

Metal grinding in Poznań — ADJATECH belt grinder grinding the edge of a steel sheet, sparks above the abrasive belt
Belt grinder · edges and flat surfaces

02 · CNC grinding

CNC grinding of flat surfaces and shafts — grinding of steel and aluminum with repeatability across the series

CNC grinders for flat and cylindrical surfaces, belt and disc grinders, and wet grinding of aluminum — this is how we prepare surfaces that must be flat, true to size and identical in every part.

What makes metal components fit and look exactly as drawn? In large part, CNC grinding: numerically controlled abrasive machining that removes a thin, controlled layer of material from the surface. On our CNC surface and cylindrical grinders, we grind the flat faces of plates and housings as well as shafts, journals, and sleeves, wherever dimensions, parallelism, and a consistent appearance across the whole batch matter. The process is automated: every piece follows the same tool path, and the result does not depend on the operator's hand.

Surface grinding and cylindrical grinding — after turning and milling

We use surface grinding for datum, mounting, and sealing surfaces that need a smoother finish or tighter dimensional accuracy after milling. Cylindrical grinding finishes bearing journals, sleeves, and pins previously made on our automatic lathes. The part never leaves the shop between operations: same drawing, same datums, one party responsible for the final dimension.

Grinding stainless, carbon and acid-resistant steel

We grind steel on CNC, belt, and disc grinders, depending on the shape of the part and the required finish. We carry out stainless steel grinding in a way that avoids overheating the surface and leaving discoloration: we select the belt grit, pressure, and cooling, and keep the grain direction uniform across the entire part. This matters for the satin finish on sheets, profiles, and tubes.

Wet grinding of aluminum — without tool loading

Aluminum and duralumin are soft, quickly clog abrasive belts, and lose surface flatness when overheated. That is why wet grinding of aluminum, with coolant carrying away heat and dust, produces a cleaner, more even finish. Aluminum ground this way is ready for painting, chrome plating, or further mirror polishing. Parts that come from CNC milling on our machining centers go to the grinders without being shipped between companies.

CNC grinding and grinding of a steel part at ADJATECH — sparks on the abrasive belt of a grinder
Grinding · repeatability across a production run

Grinding and polishing technologies at ADJATECH — 8 processes to choose from

Grinding and polishing technologies at ADJATECH — what we use each one for and on which materials
TechnologyApplicationsMaterials
CNC grinders — flat surfacessurface grinding: plates, bases, datum and mounting surfaces after milling; repeatable dimensions across a production runsteel · stainless · carbon · aluminum · brass · bronze
CNC grinders — cylindrical surfacesgrinding of shafts, journals, sleeves and pins (cylindrical grinding) as a finishing operation after turningsteel · stainless · carbon · bronze · aluminum
Belt grindersgrinding of edges, flat surfaces and profiles; removal of cutting and welding marks; matte and satin finish; wet grinding for aluminumstainless · aluminum · carbon · non-ferrous metals
Disc grindersflat grinding of smaller parts, edge chamfering and deburring, surface leveling before polishingsteel · stainless steel · aluminum · brass
Manual polisherspolishing of hard-to-reach areas, one-off parts, touch-ups and final mirror finishingstainless steel · aluminum · brass · bronze
Semi-automatic polishing machinesuniform, even shine on large surfaces: sheets, tubes, profiles, enclosures; series productionstainless steel · aluminum · brass
Robotic grinding and polishing systemsCNC polishing in series production — the same program, wheel path and pressure for every partstainless steel · aluminum · brass · bronze
Vibratory polishingmass finishing of small and complex parts: deburring, smoothing and shine, including in recesses and holesstainless steel · aluminum · brass · bronze

8 technologies · we match the process to the material, the part's shape and the required finish · in the same hall: milling, turning, laser cutting and a measuring station; coatings within the same order

03 · Polishing

Metal polishing — mirror polishing of stainless steel and aluminum, vibratory polishing and CNC polishing

Shine is not just about appearance. Polished stainless steel is more corrosion-resistant and easier to keep clean, and polished aluminum is ready for chrome plating or painting. We polish by hand, on semi-automatic machines, with robots and by vibratory finishing.

We carry out metal polishing on stainless steel, aluminum, brass, and bronze, from satin to mirror finish. We use hand polishers, since hand polishing of stainless steel and aluminum is indispensable in hard-to-reach areas and for one-off parts, as well as semi-automatic polishing machines, which give a uniform, even shine on large surfaces. Robotic grinding and polishing systems handle series production: the same program, the same wheel path, and the same pressure for every piece in the batch.

Mirror polishing of stainless steel — sheets, tubes and turned parts

For stainless steel polishing, meaning high-gloss polishing of stainless and acid-resistant steel, we start with grinding using progressively finer grit and finish with polishing compounds and felt wheels. This is how we polish stainless steel sheets, tubes, and profiles, as well as turned and milled parts and medical components, where a smooth surface makes cleaning easier. A mirror finish on stainless steel also protects: contaminants, which are where corrosion begins, do not settle on a smooth surface.

Mirror polishing of aluminum — automotive and aerospace

Mirror polishing of aluminum requires different compounds and less pressure than steel, because aluminum heats up easily. Polished aluminum from our shop goes mainly to the automotive and aerospace industries: covers, decorative parts, housings, and components that are meant to shine or to receive a galvanic coating.

Vibratory polishing of stainless steel and aluminum — complex shapes

Vibratory polishing is a bulk finishing process: parts run in a tub with abrasive or polishing media that reach recesses, holes, and edges inaccessible to a wheel. We use it for small and complex parts made of stainless steel, aluminum, and brass, for deburring, smoothing, and giving the entire batch a uniform shine at once.

CNC polishing — semi-automatic machines and robots for series production

We choose CNC polishing on semi-automatic machines and in robotic cells when consistent appearance matters: every piece comes out with the same shine. Send photos or a drawing of your part through the quote form, and we will select the technology and give you a price per piece.

Mirror polishing of metals at ADJATECH — a polishing wheel gives a high-gloss finish to a stainless steel roller
Mirror polishing · polishing wheel

04 · Materials and finishes

Materials and finish levels — matte, satin, mirror, and surface preparation for painting, chrome plating and gold plating

We select the finish level based on the function of the part and what happens to it next: whether it stays a matte structural component, shines as a decorative part or receives an electroplated coating or paint.

Which materials do we grind and polish?

  • Stainless and acid-resistant steel: grinding to matte and satin finishes and high-gloss polishing; aesthetics and corrosion protection in one process.
  • Aluminum and duralumin: aluminum grinding, including wet grinding, and mirror polishing of aluminum for the automotive and aerospace industries.
  • Brass and bronze: bronze grinding and brass polishing that give decorative parts and fittings a deep, warm shine.
  • Carbon steel and non-ferrous metals: grinding before painting, copper plating, or chrome plating; deburring and surface leveling after machining.

Matte, satin, or mirror — how to choose the finish level?

Matte is an even grind with a uniform direction, the choice for structural parts, functional surfaces, and parts that should not reflect light. Satin gives a soft, directional shine, popular on stainless steel sheets, profiles, and enclosures. Mirror (high gloss) takes the most grinding and polishing stages and is chosen for aesthetics, hygiene, and before chrome or gold plating. The higher the finish grade, the more operations it takes, so state the finish you need in your inquiry, and we will advise which grade is sufficient.

Surface preparation for painting, copper plating, chrome plating, and gold plating

A coating does not hide substrate defects: scratches and waviness are more visible after chrome plating than before. That is why we grind and polish each part to the grade the given process requires: an even matte finish is enough for powder coating, while decorative chrome and gold need a high gloss. We apply special coatings (powder coating, electroplated chrome, 24-karat gold plating, PVD) in the same facility, so a single supplier is responsible for both substrate and coating. Markings, logos, and serial numbers are applied to the finished surface in our engraving and marking department.

Grinding aluminum and stainless steel on an ADJATECH belt grinder — surface preparation for painting and chrome plating
Abrasive belt · matte, satin, mirror

05 · Why us

Why choose our CNC grinding services? Repeatability, dimensional control, and the whole part under one roof

CNC grinding is not only about accuracy, but also about saving time and cost in a production run: we create the program and set up the machine once, and every following part repeats the result of the first.

Advantages of CNC grinding — what do you gain?

  • Repeatability across a batch: tool path, pressure, and feed rate are stored in the program, so the hundredth piece looks like the first.
  • Dimensional accuracy: grinding removes a thin, controlled layer of material, so datum surfaces, journals, and sleeves hit the tolerance specified in the drawing.
  • Smoothness with a function: in medical applications it makes cleaning easier, and in aerospace and tooling it reduces wear and friction between mating surfaces.
  • Lower cost per piece in series: automated CNC grinding and polishing replace hours of manual work where the batch matters, not the single piece.
  • Custom CNC grinding: we adapt the process to your drawing and surface standard, including for complex projects.
  • The whole part from one contractor — cutting, milling, turning, grinding and polishing in one hall, and coatings within the same order.

Our technology — CNC grinders, wheels, brushes, compounds, and felts matched to the metal

The machine is half of the result; the other half is the abrasive tooling. We use different wheels and belts for steel than for aluminum, and we select metal grinding brushes, sandpaper, metal polishing compounds, and polishing felts according to the material and the finish level. CNC grinders handle flat and cylindrical surfaces, polishing machines and semi-automatic units deliver a uniform finish over large surfaces, and grinding and polishing robots repeat the program part after part.

Quality control — CMM and 3D scanner in the same shop

We check dimensions after grinding on the coordinate measuring machine and 3D scanner as part of our finished product inspection, and compare the surface appearance with the reference approved on the first piece.

For production runs and demanding finishes, we start with a reference sample: you approve it, and then we process the batch using the same program and the same tools.

06 · Applications

Grinding and polishing for automotive, medical, aerospace and tooling — industrial series and one-off projects

Our grinding and polishing services serve applications where surface finish is part of a part's function — or its showcase. We handle industrial production runs as well as one-off, non-standard projects.

Automotive and aerospace — polished aluminum and stainless steel

For automotive customers, we polish aluminum and stainless steel to a mirror finish: covers, trim parts, strips and housings that need to shine or take an electroplated coating. In aerospace, what matters most is repeatability and the smoothness of mating surfaces — this is where our CNC grinders for flat surfaces and shafts come in, along with vibratory polishing of small, complex parts.

Medical and tooling — smoothness with a function

In medical applications, smooth, polished stainless steel is easier to clean and does not trap contaminants; in tooling, precision grinding of flat and cylindrical surfaces determines fit and service life. In both industries, CNC grinding delivers accuracy and repeatability that manual machining cannot match, and the inspection station in the same shop confirms dimensions before shipment.

Decorative parts, industrial series and one-off projects

Alongside industrial components, we finish decorative parts made of brass, bronze and stainless steel — from satin to mirror finish, including preparation for gold plating and chrome plating. We accept both repeat production runs and one-off, custom orders: prototypes and series run through the same machines. You can find the full range of finishing services in the ADJATECH offer, and if you are unsure which finish level to choose, contact us and talk to our machining department.

Projects · Grinding and polishing

Polished and ground parts made in our shop

Parts with a mirror or brushed finish: handles, a cover, a cylinder, boxes, panels, connectors and an arm with a sleeve — selected projects. Click a tile to see the full-size image.

  • Arched handle with a mirror finish — ADJATECH project Arched handle with a mirror finish
  • Three-legged base with a four-arm clamping spider, mirror finish — ADJATECH project Three-legged base with a four-arm mounting cross, mirror finish
  • Polished domed cover with a nozzle — casting after machining — ADJATECH project Polished domed cover with a nozzle — casting after machining
  • Mirror-polished cylinder — an ADJATECH project Mirror-polished cylinder
  • Rectangular box with a mirror-polished lid — an ADJATECH project Rectangular box with a mirror-polished cover
  • Two rectangular boxes with mirror-polished lids — an ADJATECH project Two rectangular boxes with mirror-polished covers
  • Mirror-polished bent shell-shaped panel — an ADJATECH project Curved shell-shaped panel, mirror-polished
  • Mirror-polished semicircular channel with three mounting holes — an ADJATECH project Semicircular channel, mirror-polished, with three mounting holes
  • Mirror-polished semicircular plate divided into four segments — an ADJATECH project Semicircular plate, mirror-polished, divided into four segments
  • Two semicircular parts — one gold-colored with a brushed surface and one mirror-polished — an ADJATECH project Two semicircular parts — one with a gold-colored brushed surface and one mirror-polished
  • Flat connector with a brushed surface and three holes — an ADJATECH project Flat brushed-finish connector with three holes
  • Faceted copper-colored heart with brushed sides — an ADJATECH project Faceted copper-colored heart with brushed sides
  • Faceted gold-colored heart with brushed sides — an ADJATECH project Faceted gold-colored heart with brushed sides
  • Polished arm with a hole and sleeve — ADJATECH project Polished arm with a hole and a sleeve

All projects

Order process

How to order grinding and polishing: from a drawing or photo of the part to a finished surface

Placing an order is simple. Our process engineer selects the process based on the material, shape, and required finish, and you approve a reference sample before we machine the series.

  1. Your move

    Send a drawing or photos of the part

    Send a drawing, model, or photos of the part and specify the material, quantity, and required finish: matte, satin, mirror, or preparation for a specific coating. If you have a surface reference sample, let us know.

  2. What we do

    Process selection and quote

    Our process engineer selects the process — CNC, belt, or disc grinding, manual polishing, semi-automatic or robotic polishing, or vibratory polishing — and prepares a quote with a price per piece. We give the lead time together with the quote, always after confirming it with you.

  3. What we do

    Reference sample, grinding, and polishing

    For series production and demanding finishes, we start with a reference sample for your approval. We then process the batch using the same program and check dimensions at an inspection station in the same shop.

  4. Your move

    Pickup or shipping

    We protect finished parts against scratching in transit and ship them by courier throughout Poland, or make them available for pickup in Janikowo near Poznań.

Send your part for a quoteContact details

Questions and answers

FAQ — frequently asked questions about CNC grinding and polishing

Thirteen answers to help you get started: materials, finish grades, mirror polishing, vibratory polishing, prices, and shipping throughout Poland. Didn't find your answer? Call or write to us.

Send your part for a quoteAsk your own question

What is CNC grinding and what are its advantages?

CNC grinding is a numerically controlled abrasive process: the grinder removes a thin, controlled layer of material from the surface according to a program, not by eye. The main advantages are dimensional accuracy, repeatability across the entire series, and grinding of flat and cylindrical surfaces without manual operator input. With CNC grinders and carefully selected tools — abrasive wheels, belts, and brushes — we achieve an even surface faster and at lower cost than with manual methods, which matters especially for larger batches.

What materials can be CNC ground and polished?

We grind and polish stainless steel, aluminum, brass, and bronze, as well as carbon steel, acid-resistant steel, duralumin, and other non-ferrous metals. For each material we select the abrasives, compounds, and parameters — soft aluminum is ground differently than hard acid-resistant steel. We produce both industrial components and decorative parts; the parts can come from our own production or be supplied by you.

How much does CNC grinding cost?

The price of CNC grinding depends on the material, part size and shape, required finish (matte, satin, or mirror), required accuracy, and quantity — in a series the cost per piece drops, because we set up the program and machine only once. We quote every project individually: send a drawing or photos of the part via the form, and we will reply with a price per piece and a lead time confirmed with you.

Do you offer mirror polishing of aluminum?

Yes. We mirror-polish aluminum on semi-automatic polishing machines and by hand, using polishing felts and aluminum polishing compounds — the material heats up easily, so we work with less pressure than on steel. We polish larger series in a robotic system and small parts by vibratory polishing. The result is a smooth, glossy surface for automotive, aerospace, and decorative parts, also ready for chrome plating.

What technologies do you use for polishing metals?

For metal polishing we use hand polishers (hard-to-reach areas, one-off parts), semi-automatic polishing machines (uniform gloss on large surfaces), robotic grinding and polishing systems (series, CNC polishing), and vibratory polishing (small and complex shapes). We work with polishing compounds, felts, and wheels and brushes for polishing stainless steel and aluminum. Our process engineer selects the technology after reviewing the drawing or part.

Do you mirror-polish stainless steel?

Yes — mirror polishing of stainless steel is one of our most common services. We finish stainless steel sheets, tubes, profiles, and turned or milled parts made of stainless and acid-resistant steel. The process starts with grinding using progressively finer grit and ends with polishing compounds and felts. A high gloss improves appearance and makes the surface easier to keep clean, which is why medical customers and manufacturers of decorative parts choose it.

What is vibratory polishing and when do you use it?

Vibratory polishing is a bulk finishing process: we place the parts in a vibrating tub with abrasive or polishing media that reach recesses, holes, and edges inaccessible to a polishing wheel. We use it for small and complex parts — vibratory polishing of stainless steel, aluminum, and brass gives the whole batch a uniform finish at once: it removes burrs, smooths, and adds gloss. It is a cost-effective choice for series of small parts.

Do you wet grind aluminum?

Yes. We use wet grinding of aluminum — with coolant that carries away heat and dust — when an even, clean finish matters, without overheating and without loading the abrasive tool, which soft aluminum tends to cause. Aluminum ground this way is ready for painting, chrome plating, or further mirror polishing. We grind both aluminum and duralumin from our milling centers and parts supplied by you.

Do you provide grinding and polishing for customers from Warsaw and all of Poland?

Yes. Although our shop is located in Janikowo near Poznań, companies from Warsaw, Lublin, Wrocław, Łódź, the Tri-City, and other cities across Poland order metal polishing and stainless steel grinding from us. You send the parts by courier or deliver them in person, and after processing we ship them back in protective packaging. We prepare the quote from photos and a drawing, with no need to visit the shop.

Do you prepare surfaces for chrome plating or painting?

Yes — surface preparation for painting, copper plating, chrome plating, and gold plating is a standard part of our offer. A coating highlights every scratch and wave in the substrate, so we grind and polish the part to the grade required by the given process: an even matte finish is enough for powder coating, while decorative chrome or gold needs a high gloss. We apply coatings in the same facility, so one contractor is responsible for both the substrate and the coating.

Do you grind shafts and bores?

We grind shafts — journals, sleeves and pins — on CNC cylindrical grinders, usually as a finishing operation after turning on our automatic lathes. Flat surface grinding is done on surface grinders. We assess bore grinding in metal case by case from the drawing — feasibility depends on diameter, depth and required tolerance. Send us your documentation and our process engineer will propose a process.

What is the difference between grinding and polishing, and when is a matte finish enough?

Metal grinding removes material with an abrasive tool and gives the surface its dimension, flatness and a uniform matte or satin grind finish. Metal polishing barely changes the dimension — it smooths out grinding marks with pastes and felt wheels to a gloss or mirror finish. A matte finish is sufficient under powder coating, on functional surfaces and on parts that should not reflect light; a mirror finish is chosen for aesthetics, hygiene and as preparation for chrome or gold plating. Each stage adds time, so specify the finish in your inquiry.

Do you grind and polish customer-supplied parts made by another company?

Yes. We accept customer-supplied parts — laser-cut blanks, and turned, milled or welded parts made by another manufacturer — and bring them to the required finish. Before quoting, we ask for photos or a sample so we can assess the surface condition: deep scratches and weld marks require more grinding stages than a clean part straight from CNC machining. Prototypes and series runs go through the same machines, so the approved reference sample applies to the entire batch.

Quote

Request a quote for grinding and polishing — we will reply with a price and lead time

Send a drawing or photos of the part, and specify the material, quantity and required finish — matte, satin, mirror or preparation for coating. Your inquiry goes directly to the machining department — not through a front desk.

Working hours Mon–Fri 8:30 AM–4:30 PMFacility Janikowo near PoznańCoverage all of Poland