Quality control · Mitutoyo CMM · 3D scanner

Inspection of finished parts — quality control on a CMM coordinate measuring machine

Measurement and inspection of finished parts is a standard stage of our production: every part machined on CNC and conventional machines is inspected on our own Mitutoyo CMM coordinate measuring machine in our facility in Janikowo near Poznań — we do not outsource dimensional inspection. We check shape with a Scanology Simscan 42 3D scanner with an accuracy of 0.02 mm, and we issue a PDF inspection report for each batch. We also measure customer-supplied parts made outside ADJATECH and analyze complaints — with measurements and a report.

CMM machineMitutoyo · coordinate measurement3D scanneraccuracy 0.02 mmResultPDF report · deviation map

Get a quote for part measurementCall: +48 663 593 459

Finished part measurement at ADJATECH — Mitutoyo CMM coordinate measuring machine with a monitor at the inspection station in Janikowo
Mitutoyo CMM · dimensional inspection in the shop

Service parameters

Production quality control and part measurement: Mitutoyo CMM, 3D scanner and hand tools in one facility

We carry out dimensional inspection in-house: every part machined on our CNC and conventional machines is inspected on our own Mitutoyo CMM coordinate measuring machine, not in an external laboratory. We check the shape of the entire surface with a Scanology Simscan 42 3D scanner with an accuracy of 0.02 mm + 0.015 mm/m, and in-process dimensions during a production run with calipers, micrometers, a height gauge and gauges at the machine tools.

The result is a PDF measurement report for the batch — proof of product quality inspection that you attach to your own documentation. We make the same stations available to external customers: we measure parts supplied by customers and made outside ADJATECH, and analyse complaints. We sign an NDA on request; we give the date and price together with an individual quote.

  • Automotive
  • Aerospace
  • Medicine
  • Energy
  • Machine building
  • Electronics
Quality control · parameter sheetJanikowo near Poznań
01Coordinate measuring machine
Mitutoyo CMMcoordinate measurement of machined parts — in the same shop where they are made
023D scanner
Simscan 42 · 0.02 mmshape inspection and deviation map against the CAD model; parts from 5 × 5 × 5 mm
03Hand tools
Calipers · micrometersheight gauge and go/no-go gauges at the machine tools — ongoing checks during the run
04Inspection scope
First article · production run · finalalso contract measurement of customer-supplied parts made outside ADJATECH
05Documentation
PDF measurement reportbatch inspection record on request; NDA on request
06Lead time
By arrangementwe state the measurement and report lead time together with your individual quote

Plant in Janikowo · contact measurement on site, 3D scanner also available on-site at your location

01 · Inspection scope

Quality control of finished parts in Poznań — what we measure and when

Four inspection modes on the same stations: first-article measurement before the run, in-process inspection, final inspection before shipping, and measurement of customer-supplied parts. Each ends with a result referenced to the drawing.

A part machined on our milling centers and automatic lathes is checked for quality and order conformity before it leaves our facility in Janikowo near Poznań. We do this on our own Mitutoyo CMM coordinate measuring machine, which stands right next to the machine tools — with no need to ship parts to an external laboratory or wait for someone else's report. The measurement result goes straight back to the operator, and the batch comes with a document you can attach to your own quality documentation.

First-article measurement before the run starts

Before the run starts, we measure the first part across the full range of features on the drawing: dimensions, geometric position and form tolerances. Only an approved result releases the machining program and fixturing for further production. This is the cheapest moment for a correction — an error caught on the first part is not repeated across the whole batch.

Production quality control — measurement during the run

During the run, the scope and frequency of measurements follow the drawing requirements and agreements with the customer. Toleranced dimensions go to the CMM, while the operator carries out routine checks at the machine with calipers, micrometers, a height gauge and go/no-go gauges. In-process control done this way catches tool wear before a part goes out of tolerance.

Final inspection before shipping and measurement of customer-supplied parts

Before shipping, each batch goes through a final inspection: we check dimensions against the drawing, completeness and conformity with the order, and we include a PDF inspection report with the batch. We also make the same stations available to external customers — we measure customer-supplied parts made outside ADJATECH and analyze complaints and nonconformities, always with measurements and a report. All we need is a drawing with tolerances and the part; we agree on the inspection lead time together with the quote.

First article · production run · final inspection · customer-supplied parts — four inspection modes on the same stations: Mitutoyo CMM, 3D scanner and hand tools.

Quality control of finished parts at ADJATECH — the coordinate measuring machine probe measures turned parts on a granite table
CMM · measurement of turned parts

02 · CMM

Mitutoyo CMM coordinate measuring machine — coordinate measurement of machined parts

Contact measurement on a CMM gives a numerical, repeatable result that does not depend on the skill of the person measuring. That is why we base the report on it and leave hand tools for routine checks at the machine tool.

A coordinate measuring machine (CMM) measures by contact: a probe touches the part surface at successive points, and software builds geometric features from them — planes, cylinders, circles, axes — and compares them with the nominal dimensions and tolerances from the drawing. At ADJATECH we perform coordinate measurements on a Mitutoyo machine located in the same facility as the machining centers and automatic lathes.

What we measure on the Mitutoyo coordinate measuring machine

  • Diameters and depths of holes, shafts and bushings
  • Hole positions relative to datums and to each other
  • Distances between planes and step heights
  • Surface flatness and parallelism
  • Perpendicularity and coaxiality
  • Runout of rotating surfaces

CMM measurement vs. hand tools at the machine tool

The coordinate measuring machine does not replace hand tools — it complements them. Calipers, micrometers, a height gauge and go/no-go gauges stay at the machine tools: operators use them to check dimensions during a run without interrupting machining. The CMM handles toleranced dimensions, position and form features that cannot be measured reliably by hand, and parts for which the customer needs a report.

In-house coordinate measuring — why it matters

First-article, in-process and final inspection take place without shipping parts to an external lab, and the measurement result goes straight back to the operator, who can correct the program or the tool. For you, this means a single party responsible for both manufacturing and dimensional inspection — with no dispute between the manufacturer and the measuring party over who made the error. We also make the same machine available on request for customer-supplied parts; you will find a comparison of the three measurement methods in the table below.

Dimensional inspection at ADJATECH — height gauge, caliper, gauge blocks and a part on the measuring table next to the machine tools
Hand tools · height gauge and caliper

Measurement methods — CMM, 3D scanner and hand tools: what they check and when we use them

Methods for measuring finished parts at ADJATECH — what they check and when we use them
MethodWhat it checksWhen we use it
Mitutoyo CMM coordinate measuring machine (contact measurement)Linear dimensions and diameters, depths, hole positions relative to datums, flatness, parallelism, perpendicularity, coaxiality, runoutFirst article before a run, toleranced dimensions during a run, final inspection with a batch report, customer-supplied parts, complaint analysis
Scanology Simscan 42 3D scanner (optical measurement, 0.02 mm + 0.015 mm/m)Shape of the entire surface, comparison with the CAD model, deviation map; parts from 5 × 5 × 5 mm, matte and glossy surfacesFreeform surfaces, castings and molded parts, parts without convenient datums, large parts measured on site at the customer's location
Hand tools (calipers, micrometers, height gauge, go/no-go gauges)Individual external and internal dimensions, heights, threads and holes checked with gaugesIn-process checks at the machine tool during a run, quick part check before handing over to the CMM

3 methods · the choice of method depends on the tolerances on the drawing, the shape of the part and the batch size · the CMM and 3D scanner are in the same facility as the machine tools

03 · 3D scanner

3D measurement services — 3D scanner and deviation map, shape inspection against the CAD model

Where the shape of the entire surface matters rather than a few toleranced dimensions, we complement contact measurement with an optical scan. We overlay the scan on the CAD model and show deviations in color — across the entire part, not at a few points.

The Scanology Simscan 42 handheld optical scanner, with a stated accuracy of 0.02 mm + 0.015 mm/m, captures millions of points on the part surface without touching it. We scan parts from 5 × 5 × 5 mm, with matte and glossy surfaces, at our facility in Janikowo or on-site at the customer's location. You will find the full description of this service — including reverse engineering and pricing — on the measurement and 3D scanning page.

When to use a 3D scanner instead of a coordinate measuring machine

  • Freeform surfaces — curves, transitions and contours that would take hundreds of points to measure on a CMM.
  • Castings, molded parts and bent components — shape evaluation before and after machining.
  • Parts without convenient datums — we reference the scan to the CAD model, not to the measuring table.
  • Large parts and permanently installed components — measurement at the customer's site, without disassembly.

Deviation map — how to read the CAD comparison result

We overlay the scan on the customer's STEP model and generate a deviation map: a color visualization in which each area of the surface is colored according to its deviation from nominal. You can see immediately where the part is within tolerance and where it falls outside it, and by how much. We attach a PDF inspection report to the map, with values at selected points and cross-sections.

CMM and 3D scanner at one workstation

We often combine both methods in a single order: toleranced dimensions — diameters, hole positions, perpendicularity — are measured by contact on the CMM, while surface shape is evaluated from the scan. You receive one report that answers both "is the dimension within tolerance?" and "does the shape match the model?"

3D measurement services at ADJATECH — handheld 3D scanner and CMM coordinate measuring machine over a part on a granite table
3D scanner + CMM · one workstation

04 · Documentation

Inspection report and product quality control record — what you receive after measurement

Every measurement produces a document that you add to the batch documentation, pass on to your customer or auditor, and refer to when filing a claim.

The PDF inspection report serves as proof of product quality control: it confirms that a specific batch was measured using a defined method and shows the result against the drawing. It is not a general quality statement, but a summary of numbers — nominal, tolerance, result, deviation — for every inspected feature.

What the PDF inspection report contains

  • Identification — drawing number, order or batch number, measurement date and method (CMM, 3D scanner, hand tools).
  • Feature table — nominal dimension, tolerance, measured result, deviation and conformity assessment for each inspected feature.
  • Deviation map — for 3D scanner measurements, as a color comparison with the CAD model.
  • Remarks — detected nonconformities and their magnitude relative to the tolerance.

Product quality certificate and batch inspection record

The PDF report is the standard measurement result. On request, we issue an inspection record for the batch — with results for a sample of an agreed size or for every part, if your drawing or your customer's contract requires it. We define the scope of the report at the quoting stage: which features, how many parts, in what form. For this we need a drawing in PDF or DXF with tolerances and a STEP model, if one exists.

Documentation and confidentiality

At ADJATECH, our procedures for measurement, records and handling of non-conforming products are documented. We treat drawings, models and measurement results as confidential; on request we sign an NDA before documentation is handed over.

ADJATECH inspection report — deviation map, color comparison of a 3D scan with the part's CAD model on screen
Deviation map · scan vs. CAD model

05 · Complaints

Complaints and nonconformity analysis — measurement, report and process correction

With a dimensional complaint, what counts is reliable measurement, not an exchange of opinions. We check it with the same method we use to inspect production and describe the result in a report.

When a customer reports that a part does not fit the assembly or does not meet the drawing, we measure it on a CMM or with a 3D scanner and compare the result with the documentation. The goal is not to defend the batch, but to determine what deviates from the drawing and by how much, and to eliminate the cause so the problem does not return in the next run. Whether a part will perform its function in the assembly depends on dimensions and shape within tolerance, which is why we start the analysis there.

How we analyze a complaint step by step

  • Measurement of the part under complaint — the full range of features from the drawing and, if needed, a deviation map against the CAD model.
  • Comparison with the production report — we compare the result with the first-article measurement and the final inspection of the same batch.
  • Root cause identification — tool, fixturing, machining program, material or interpretation of the drawing.
  • Analysis report — results, deviations and a description of the cause in PDF, ready to pass on within your organization.
  • Process correction and re-measurement — the correction is applied to the program or process, and the next part is measured again.

Nonconformance found in-house — what happens to the batch

We catch most non-conformities internally: on the first piece or during final inspection, before the batch leaves the hall. A part out of tolerance is not shipped — depending on the feature it is reworked or made again, and the customer is informed if this affects the agreed date. We keep inspection records, so every batch can be traced back.

Nonconformance analysis of parts from another supplier

We also provide measurement and reporting for parts we did not manufacture — when you need hard numbers for a discussion with your supplier or want to check a delivery before assembly. You receive an inspection report referenced to the drawing and, for 3D scans, a deviation map; the next steps are up to you. If the part needs to be reworked or made again, we can do it in our CNC machining department.

06 · Industries

Measurement services for industry — sectors served and why it pays to measure at the part manufacturer

Requirements vary between industries — a pump housing has different tolerances than an electronics enclosure component or a part for a medical device — but the tools are the same, and the result is always a report referenced to the drawing.

We provide measurement services for industry both for our own production and for customers who order measurement only. Whatever your industry, the part goes onto a coordinate measuring machine, a 3D scanner or a bench with hand tools, and you receive a PDF inspection report with the scope agreed at the quoting stage.

Industries for which we measure parts

  • Metalworking and machinery — housings, shafts, bushings, plates, spare parts
  • Automotive — batch inspection, first-article parts, component fit
  • Aerospace — parts with tight position and form tolerances, batch documentation
  • Energy — valve and equipment components, remanufacturing parts
  • Medical — small turned and milled parts for devices, batch inspection report
  • Electronics — enclosures, heat sinks, mounting components
  • Construction — fasteners, fittings and structural components after machining

The whole part and its measurement from one manufacturer

The greatest benefit comes from combining machining and inspection in one place. A part after milling on 3- and 5-axis centers or after turning on CNC automatic lathes goes to the coordinate measuring machine without any transport, and the result goes straight back to the operator, who can correct the program immediately. A part cut on a fiber laser and finished in the machining department has a single person responsible for the final dimension — there is no dispute between the manufacturer and the lab over whose error the report shows.

Contract coordinate measurement — parts sent in from all over Poland

If you don't manufacture with us but need measurement, send or bring your parts to Janikowo near Poznań together with a PDF/DXF drawing and a STEP model. We will agree on the scope of features, sample size and report format, and give you a lead time together with the quote. Larger parts and permanently installed assemblies are measured on site with a 3D scanner. You can find examples of parts we have made and measured in our projects.

Order process

How to order contract coordinate measurement? From drawing to PDF measurement report

All we need for a quote is a drawing with tolerances and the quantity. Then we select the method, measure, and deliver the report — and if the part is made here, inspection is part of the order.

  1. Your move

    Send a drawing and the part or a description

    Send a PDF or DXF drawing with tolerances and a STEP model, mark the critical dimensions and state the number of parts to be measured. Send the parts by courier or bring them to Janikowo near Poznań; for large parts, describe where they are located.

  2. What we do

    Scope and quote

    We select the method — CMM, 3D scanner or hand tools — and agree on the list of features, sample size and report format. We send you an individual quote together with the measurement lead time; if needed, we sign an NDA.

  3. What we do

    Measurement on a CMM, with a scanner, or by hand

    We measure on a Mitutoyo coordinate measuring machine, scan with the Simscan 42 scanner and compare the result with the drawing or CAD model. In case of nonconformity, we immediately state which feature is out of tolerance and by how much.

  4. Your move

    Report and pickup

    You receive a PDF measurement report, a deviation map for 3D scans and, on request, a batch inspection protocol. You can pick up the parts in person or we ship them by courier; if you wish, we carry out rework or the next batch in-house.

Get a quote for part measurementAsk for details

Questions and answers

FAQ — questions about measuring finished parts, the coordinate measuring machine and product quality control

Twelve short answers to the questions we hear most often: how measurement works, what the report contains, whether we measure parts made elsewhere and what determines the price. Didn't find your question? Write or call us.

Get a quote for part measurementAsk your own question

How does the measurement process for finished parts work?

We start with the drawing: we determine which features are to be checked and to what tolerance. The part goes to a measuring station — the Mitutoyo CMM coordinate measuring machine, a 3D scanner or a bench with hand tools — and we compare the result with the nominal dimensions. Measured values, deviations and the conformity assessment are recorded in a PDF report. If anything is out of tolerance, the information goes back to the machine operator, who corrects the program or tool, and the next part is measured again.

Why is quality control of finished parts so important?

Because a part that looks correct may be a few hundredths of a millimeter out of tolerance — and not fit the assembly it is meant to work in. Dimensional inspection after machining catches this before shipping, before a nonconformity turns into a complaint, an assembly stoppage or the cost of returning a batch. For the customer, a measurement report is also proof that the supplier checked the part with a specific method, not by eye — which matters in audits and in industries that require batch documentation.

What measurement technologies do you use?

Three complementary methods. Contact measurement on the Mitutoyo CMM coordinate measuring machine — for toleranced dimensions, hole positions, and flatness, parallelism, perpendicularity, coaxiality and runout. Optical measurement with the Scanology Simscan 42 3D scanner with an accuracy of 0.02 mm + 0.015 mm/m — for checking shape and generating deviation maps against the CAD model. Hand tools at the machines — calipers, micrometers, height gauge and go/no-go gauges — for ongoing checks during a production run. We select the method based on the tolerance on the drawing.

What is a coordinate measuring machine and what can be measured on it?

A coordinate measuring machine (CMM) is a measuring device that touches the part's surface at many points with a probe and records their coordinates in three axes. The software joins the points into geometric elements — planes, cylinders, circles — and calculates dimensions as well as form and position deviations. On the CMM we measure diameters, depths, distances, hole positions relative to datums, flatness, parallelism, perpendicularity, coaxiality and runout. The result is numerical and repeatable, which is why we base the report on it.

What does a measurement report contain — proof of product quality control?

The PDF measurement report contains order identification (drawing number, batch, date and measurement method) and a table of features: nominal dimension, tolerance, measured value, deviation and conformity assessment. For 3D scan measurements, we attach a deviation map against the CAD model. Such a document serves as a product quality inspection certificate — you add it to the batch documentation and pass it on to your customer or auditor. The scope of the report (features, number of parts) is agreed when we prepare the quote.

Is every part in a series measured?

The scope of inspection in a series follows from the drawing requirements and agreements with the customer. Fixed stages are a full first-article measurement before the run starts and a final inspection before shipping; during production, the operator checks dimensions with hand tools, and toleranced features go to the CMM. If the drawing or contract requires every part to be measured, or a batch protocol with a defined sample size, we do that and include it in the quote.

Do you measure parts made outside ADJATECH?

Yes. We carry out contract measurement of customer-supplied parts at the same stations where we inspect our own production — on the Mitutoyo CMM coordinate measuring machine, with the 3D scanner or with hand tools. We need a PDF or DXF drawing with tolerances, optionally a STEP model, and information on which features are critical for you. We receive parts in Janikowo near Poznań; the result is a PDF measurement report and, for 3D scans, also a deviation map.

Do you perform coordinate measurements on request?

Yes — for both single parts and batches. Typical orders include inspection of a delivery from another supplier before assembly, first-article measurement from a new tool or mold, inspection of a part under complaint, and a batch protocol required by the customer. We perform contact measurement in our shop; larger parts and permanently installed assemblies are measured on site with a 3D scanner. We agree on the scope, sample size and lead time together with the quote.

Which industries use our measurement services?

Primarily the metal and machinery industry, automotive, energy, aerospace, electronics and medical — industries where parts have toleranced dimensions and the customer expects batch documentation. We also measure parts for construction. We work with manufacturing companies, quality and engineering departments, and with smaller workshops that don't have their own coordinate measuring machine but need a measurement report for their customer.

Can I get a deviation map for my CAD model?

Yes. Send the model in STEP format together with the drawing — we will scan the part with the Scanology Simscan 42 3D scanner, overlay the scan on your model and generate a deviation map: a color visualization showing where and by how much the surface departs from nominal. We attach the map to the PDF measurement report together with values at selected points and cross-sections. We scan parts from 5 × 5 × 5 mm, both matte and shiny.

How much do measurement services cost?

We quote every job individually because the cost depends on the scope of work: the number of features to be inspected and their tolerances, the quantity, the method (CMM, 3D scanner, hand tools), whether you need a deviation map or a report for every part, and whether the measurement is done at our facility or on site. Send a drawing with tolerances and the quantity through the quote form and we will reply with a quote and a lead time. For parts we manufacture, first-article measurement and final inspection are a standard step of the order.

How do I prepare the part and documentation for measurement?

The most important item is a drawing with tolerances, in PDF or DXF format, and a STEP model if one exists; without them there is nothing to compare the results against. Mark the critical features and state the quantity. The part should be clean, free of coolant, chips and burrs; for 3D scanning, we matte shiny surfaces with a removable powder. If the batch has a number or marking, provide it and we will include it in the report.

Contact our metrologist

Do you have a part to measure or a batch to inspect? Ask about CMM measurement and reporting

Your inquiry about measuring finished parts goes straight to our measurement department, where Radosław Korzec will define the scope, method and price. Send a PDF/DXF drawing and a STEP model or give us a call. We will provide the measurement and report lead time together with the quote.

Working hours Mon–Fri 8:30 AM–4:30 PMFacility Janikowo near PoznańCoverage all of Poland