Service 02 / 10 · CNC Department · 3- and 5-axis

CNC machining — stainless steel, aluminum and titanium on 3- and 5-axis centers

Looking for a supplier that can make a part from milling through to inspection? CNC machining at ADJATECH is an independent department with its own machinery: 3- and 5-axis machining centers, a micro-milling machine, CNC automatic lathes, and conventional milling machines and lathes. We machine stainless steel, aluminum, brass, bronze and titanium. Prototypes and series production run on the same machines, with inspection on a CMM in the same hall.

Machining centers3- and 5-axisTurningfrom 2 mm in diameterFilesSTEP · DXF · PDF

Get a CNC machining quoteCall: +48 531 541 003

CNC machining — an ADJATECH five-axis machining center mills a housing clamped on a tilting rotary table
5-axis center · machining in a single setup

Service parameters

Machining at ADJATECH — an independent CNC department and key parameters

We carry out machining in an independent CNC department: a separate team, separate machines and its own measuring station, in the same hall as the laser cutting machines. Parts cut by laser go straight to the machining center, with no transport between companies and no second set of documentation.

We work for the automotive, aerospace, medical, electronics and machinery industries. Prototype and series production run on the same machines, so once the first article is approved, you don't change suppliers or technology.

  • Automotive
  • Aerospace
  • Medicine
  • Electronics
  • Machine building
Machining · parameter sheetJanikowo near Poznań
01Machine fleet
CNC + conventional3- and 5-axis centers, CNC micro-milling machine, CNC automatic lathes, conventional mills and lathes
02CNC milling
3- and 5-axis5-axis center machines a solid block in a single setup; micro-milling machine for small parts
03CNC Turning
from 2 mm in diameterCNC automatic lathes and conventional lathes; round and hexagonal bar stock
04Materials
Stainless steel · aluminum · titaniumalso acid-resistant steel, duralumin, brass, bronze and engineering plastics
05Quality control
CMM + 3D scanner 0.02 mmcoordinate measuring machine and Scanology Simscan 42 scanner in the hall; measurement report on request
06Lead time
By arrangementwe set the lead time based on quantity and operations, and state it together with the quote

Facility in Janikowo · orders fulfilled across Poland

01 · Scope of service

CNC machining services in Poland — scope of our machining department

The independent CNC department in Janikowo near Poznań makes parts from a single prototype to a full series — milling, turning, cutting, finishing and inspection in one hall.

We have an independent CNC machining department that works alongside our laser cutting machines but also accepts orders that have nothing to do with them. The scope is broad: from small, precision parts to complex housings and industrial structural components. Our machinery lets us handle jobs of varying difficulty while maintaining repeatability across the entire batch. Prototype and series are made on the same machines, so once the first article is approved, you don't need to change suppliers.

Precision CNC machining for demanding industries

ADJATECH technologists work with you at every stage: from design review, through selection of material and machining method, to quality control of the finished products. As a result, the part meets the technical and cosmetic requirements specified in the documentation, rather than just “roughly fitting.” We serve the automotive, aerospace, medical, electronics and machinery industries — sectors where the inspection report counts, not a declaration.

Custom CNC metal machining — what does the service include?

  • CNC milling and turning on 3- and 5-axis centers, a micro-milling machine and automatic lathes, as well as on conventional machines where that is faster and cheaper.
  • Saw cutting of bars, tubes and profiles, plus work on a CNC router with a 1500×2000 mm working area.
  • Engraving and marking — serial numbers, logos and nameplates on finished parts.
  • Grinding, polishing and special coatings — surface finishing and protection against corrosion and abrasion.
  • Measurement of finished parts on a coordinate measuring machine and a 3D scanner — every order ends with a dimensional inspection.

Metalworking in Poznań — Janikowo, Greater Poland and all of Poland

Our shop is located in Janikowo near Poznań, but we carry out CNC orders for companies from all over Poland. You send the documentation through the quote form, and we ship finished parts by courier or make them available for personal pickup. You can find the full list of services in the ADJATECH offer.

CNC metal machining at ADJATECH — milling a part with coolant, chips on the table of a machining center in Poznań
CNC milling · cutting zone cooling

02 · Machinery

Machinery — 3- and 5-axis machining centers, CNC automatic lathes and conventional machines

CNC and conventional machines in one hall: machining centers and automatic lathes for series production and complex geometry, plus conventional milling machines and lathes for one-off work, refurbishment and auxiliary operations.

The machining department works on both CNC and conventional machines. This setup lets us match the technology to the part, not the part to the machine. Series and complex solids go to machining centers and automatic lathes, while one-off jobs, refurbishment and auxiliary operations are done on conventional mills and lathes — without programming costs, which would not be justified for a single part.

Machining shop — what's on the floor?

  • 2 3-axis machining centers — precision parts with complex shapes: flat surfaces, pockets, holes and threads in repeat production.
  • 5-axis machining center — machining a part on multiple faces in a single setup, which shortens lead time and eliminates repositioning errors.
  • CNC micro-milling machine — small parts requiring exceptional accuracy: electronics, medical, precision mechanics.
  • 4 CNC automatic lathes — fast, accurate turning from bar stock starting at 2 mm diameter; series of shafts, bushings and fittings.
  • 4 conventional mills and 3 conventional lathes — smaller series, one-off projects and jobs that don't require a CNC program.

5-axis machining center — machining in a single setup

For housings, enclosures and parts with features on several sides, the 5-axis center performs the entire machining process without moving the part between fixtures. Fewer setups mean fewer datum errors and a shorter cycle time — a difference you can see in the inspection report, not just in the price. Blanks from laser cutting go to the machining centers with no intermediaries: same file, same shop floor.

CNC machining or conventional machines?

Modern CNC machining delivers repeatability and complex geometry; traditional methods offer flexibility for single parts, refurbishment and rework. That is why we maintain both groups of machines, and a process engineer makes the decision at the quoting stage, matching it to the specific requirements of the order.

ADJATECH machining department machinery — a hall with CNC and conventional machine tools and a table with finished parts
Machinery · CNC and conventional

Machinery table — machine tools of the machining department

ADJATECH machining department machinery — machines, quantity and application
MachineQuantityApplication
3-axis machining center2milling of surfaces, pockets, holes and threads in prismatic parts; repeat series
5-axis machining center1housings and 3D solids machined in a single setup; features on several faces of the part
CNC micro-milling machine1small parts and small-dimension features — electronics, medical, precision mechanics
Conventional milling machine4one-off jobs, refurbishment, blanks and auxiliary operations without a CNC program
CNC automatic lathe4turning from bar stock starting at 2 mm; shafts, bushings, fittings and rollers — round and hexagonal sections
Manual lathe3one-off parts, small series, repairs and shaft turning outside the CNC program

CNC and conventional machines · on the same shop floor: band saws up to Ø250 mm, 1500×2000 mm CNC router, grinders and polishers, CMM and 3D scanner

03 · Technologies

Types of machining — milling, turning, saw cutting, engraving and surface finishing

Machining is the common denominator: with a milling cutter, lathe tool, saw or grinding wheel, we remove excess material down to the drawing dimension. Below are the technologies we offer and what each one is used for.

Machining is the removal of excess material with a tool — a milling cutter, lathe tool, saw or grinding wheel — until the dimension on the drawing is achieved. CNC machining is the same cutting process, only numerically controlled: a program guides the tool along a programmed path, so the hundredth part is identical to the first. The types of machining we perform in Janikowo are selected based on part geometry, material and batch size.

CNC Milling — 3-Axis and 5-Axis, from Mounting Plates to Housings

We perform CNC milling on 3-axis centers, a 5-axis center and a micro-milling machine. We machine steel, stainless steel, aluminum, brass, bronze and plastics: flat surfaces, pockets, slots, holes, threads and three-dimensional shapes machined in a single setup.

CNC Turning — Shafts, Bushings, Rollers and Fittings from Bar Stock Starting at 2 mm

We carry out turning on four CNC automatic lathes and three conventional lathes. Precision turning of shafts and rollers for the automotive and heavy industries, and turning of small parts from 2 mm diameter for electronics and medical applications; round and hexagonal bar made of stainless steel, brass, bronze, aluminum and plastics.

Saw Cutting, Router Cutting, Engraving and Marking

We cut blanks to length on band saws: bars up to Ø250 mm, lengths up to 6 m, angle cuts in both directions — details on the saw cutting page. The CNC router with a 1500×2000 mm working area handles sheets of aluminum, plastics, wood and MDF. Engraving and marking with a milling cutter or laser applies serial numbers, logos and nameplates to finished parts.

Grinding, Polishing and Coatings — Finishing After Machining

After machining, a part can go on to grinding and polishing — from matte to mirror finish, on flat and cylindrical surfaces — followed by powder coating, chrome plating, gold plating or technical PVD and PTFE coatings. One set of documentation, one point of responsibility for the final dimension.

CNC turning at ADJATECH — a CNC lathe chuck turns a steel shaft, metal machining in Janikowo near Poznań
CNC Turning · Bar Stock from 2 mm

04 · Materials

CNC Machining of Aluminum and Stainless Steel — Plus Brass, Bronze, Titanium and Plastics

Every material machines differently. We match tools, speeds and cooling to the grade — from stainless steel and aluminum to titanium and engineering plastics.

We machine stainless and acid-resistant steel, aluminum and duralumin, brass, bronze, titanium and engineering plastics. For each material group we select tools, cutting speeds and cooling methods individually — these parameters determine surface quality, tool life and dimensional stability across a series. Materials that are harder to machine, such as acid-resistant steel or duralumin, are no exception for us, but part of everyday production.

CNC Machining of Stainless and Acid-Resistant Steel

Stainless steels work-harden during cutting, so they require sharp tools, stable clamping and consistent feed rates. We make valve and fitting components, machine parts for the food and chemical industries, and medical parts from them; on request, we finish them by grinding or polishing to a high gloss.

CNC Machining of Aluminum — Housings, Enclosures, Mounting Plates

Aluminum and duralumin cut quickly but tend to form built-up edge on the tool — hence intensive cooling and tools with the right geometry. Aluminum machining here most often means housings, electronics enclosures, mounting plates and brackets; blanks from laser cutting are finish-milled on the same shop floor. Finishing: grinding, polishing, powder coating or special coatings.

Brass, Bronze, Titanium and Engineering Plastics

We turn brass and bronze from bar stock on automatic lathes — fittings, bushings, plain bearings and decorative parts for chrome or gold plating. Titanium, which is harder to machine because of its low thermal conductivity, is machined more slowly, with rigid clamping and heavy cooling — it is a material for implants, instruments and aerospace parts. Engineering plastics require control of temperature and clamping forces so that the part does not deform after it is removed from the machine.

Our material or customer-supplied. We work with material from our own stock as well as with customer-supplied blanks, castings and laser-cut parts. Before machining, we check the grade, delivery condition and dimensions of customer-supplied material — these determine cutting parameters, machining allowances and process reliability.

Table of Machined Materials

Materials machined at ADJATECH — typical parts and technical notes
MaterialTypical partsWhat we watch for during machining
Stainless steel, acid-resistant steelvalve and fitting components, food and chemical machine parts, medical partswork hardening during cutting — sharp tools, stable feed rates; ground or polished finish
Aluminum, duraluminhousings, enclosures, mounting plates, bracketsbuilt-up edge on the tool — cooling and tool geometry; chip evacuation
Brassfittings, bushings, valve components and decorative partsvery good machinability; bar turning on automatic lathes; polishing, chrome plating, gold plating
Bronzesliding bushings, bearing shells, gear componentsbearing material — precise diameter fits and a smooth surface
Titaniumimplants, instruments, aerospace componentslow thermal conductivity — lower cutting speeds, rigid clamping, heavy cooling
Engineering plasticsguides, insulators, packaging machine componentscontrol of temperature and clamping forces — the material deforms more easily than metal

Stainless steel · aluminum · brass · bronze · titanium · plastics · our material or customer-supplied · cutting parameters matched to grade and delivery condition

05 · Quality control

Precision metal machining under control — CMM and 0.02 mm 3D scanner

We finish every order with a measurement at our own station: the CMM and the 3D scanner stand in the same hall as the machine tools.

We end every order with measurement of the finished parts — not with calipers at the machine, but at a measuring station on the same shop floor. This closes the loop: drawing, program, machining, measurement, correction. Precision metalworking without measurement is just a claim; at our shop, it ends with an inspection report.

CMM — first-article and batch measurement

On the coordinate measuring machine, we check dimensions, hole positions, perpendicularity and parallelism of surfaces, and the form tolerances specified in the documentation. We measure the first article before starting a series, and the scope of inspection within the series — selected parts or every part — is agreed with the customer according to the drawing requirements. More on the scope: measurement of finished parts.

Scanology Simscan 42 3D scanner — deviation map and reverse engineering

Freeform surfaces and parts with complex geometry are compared with the CAD model using a 3D scanner with an accuracy of 0.02 mm. The result is a color deviation map and a PDF report. The scanner also works the other way: from a physical sample with no documentation, we create a STEP model that can be sent to the machine.

Order oversight

The course of an order — from receipt of documentation to final inspection — is defined by procedures, not by one operator's memory.

What accuracy do we achieve? It depends on the part, the material and the clamping method — which is why we don't give a single figure for all orders. We confirm the tolerances from your drawing with a CMM measurement and a report, and we agree on critical dimensions before starting a batch.

CNC machining quality control — the CMM probes parts after machining at ADJATECH
CMM measurement · 0.02 mm 3D scanner

06 · Industries and applications

CNC services for industry — orders for automotive, aerospace, medical, electronics and machinery manufacturing

Five industries, five different sets of requirements — from batches of shafts for automotive to single titanium parts for medical. Each uses a different part of our machinery.

We provide CNC services for manufacturing companies, design offices and maintenance departments. Most of our orders come from five industries — each has different requirements and each uses a different part of our machinery.

  • Automotive — shafts, rollers, bushings, mounting components and housings; repeat series on automatic lathes and 3-axis centers, CMM inspection.
  • Aerospace — parts made of aluminum, duralumin and titanium: housings and brackets machined on 5 axes in a single setup, with an inspection report.
  • Medical — small stainless steel and titanium components: parts for instruments and devices, polished surfaces, turning from 2 mm.
  • Electronics — aluminum housings and panels, brass fittings, micro-milled small parts, engraved markings.
  • Machinery manufacturing — mounting plates, housings, bronze plain bushings, spare parts and refurbishment on conventional machines.
  • Prototypes and small batches — for design offices and R&D departments: the same machinery and the same inspection as in series production.

Metalworking company for prototypes and production runs — why order CNC machining from ADJATECH?

Because the part never leaves the shop between operations. Laser-cut blank, milling, turning, grinding, coating and measurement — one set of documentation and one party responsible for the final dimension, instead of a chain of subcontractors, each passing the tolerance on to the next. You can see examples of finished parts in our projects, and you can read about the team and the facility in the About us section.

CNC orders from all over Poland — how does remote cooperation work?

You send the documentation electronically and receive a quote with the price per piece and for the full set; we agree on the lead time after confirmation. We ship finished parts by courier in secure packaging, or you can pick them up in Janikowo near Poznań, Mon–Fri 8:30–16:30. Inquiries go directly to the machining department — contact details.

Projects · CNC Machining

Parts machined at our facility

Sleeves, rings, frames, plates, bodies, connectors and plugs — an overview of projects involving turning, milling, drilling and tapping. Click a tile to view the photo in full size.

  • Turned bushing with four slots in the wall — ADJATECH project Turned sleeve with four cutouts in the wall
  • Turned ring with a flange and a circumferential groove — ADJATECH project Turned ring with a flange and a circumferential groove
  • Turned bushing with a circumferential shoulder and a machined bore — ADJATECH project Turned sleeve with a circumferential shoulder and a machined bore
  • Turned ring with an elongated hole in the wall — ADJATECH project Turned ring with an elongated hole in the wall
  • Turned disc with a ring of holes and milled pockets — ADJATECH project Turned disc with a ring of holes and milled pockets
  • Square CNC-milled frame with corner brackets and holes — ADJATECH project Square CNC-milled frame with corner brackets and holes
  • Milled frame with an internal recess and mounting holes — ADJATECH project Milled frame with an internal recess and mounting holes
  • Milled plate with edge notches and screw holes — ADJATECH project Milled plate with edge cutouts and bolt holes
  • Milled plate with tapered seat and corner holes — ADJATECH project Milled plate with a tapered seat and corner holes
  • CNC-milled block with through holes and threaded holes — ADJATECH project CNC-milled block with through holes and threaded holes
  • Milled plate with a grid of pins machined from a single piece of material — ADJATECH project Milled plate with a grid of pins machined from a single piece of material
  • CNC-milled housing with bearing bore and mounting lugs — ADJATECH project CNC-milled housing with a bearing bore and mounting lugs
  • Milled bracket with pockets and side holes — ADJATECH project Milled bracket with pockets and side holes
  • Two turned sleeves with internal thread — ADJATECH project Two turned sleeves with internal threads
  • Angle part made from flat bar with holes, including threaded holes — ADJATECH project Angle part made from flat bar with holes, including threaded holes
  • Plate with milled channel and rows of mounting holes — ADJATECH project Plate with a milled channel and rows of mounting holes
  • Node connector with arms, sockets and holes — ADJATECH project Node connector with arms, sockets and holes
  • Oval mounting plate with two large holes and a countersunk threaded hole — ADJATECH project Oval mounting plate with two large holes and a countersunk threaded hole
  • Turned cone with central bore — ADJATECH project Turned cone with a central bore
  • Hub with arms and a central bore — casting after machining — ADJATECH project Hub with arms and a central bore — casting after machining
  • Turned cylindrical plug with a step and a radial threaded hole — an ADJATECH project Turned cylindrical plug with a step and a radial threaded hole
  • Milled block with a beveled wall, grooves and holes — an ADJATECH project Milled block with a sloped wall, slots, and holes
  • U-bolt — a U-shaped bent rod with threaded ends — an ADJATECH project U-bolt — a U-shaped bent rod with threaded ends
  • Polished arm with a hole and sleeve — ADJATECH project Polished arm with a hole and a sleeve

All projects

Order process

How to order CNC machining: from STEP file to inspected part

We keep CNC orders simple: documentation, technical review, quote with lead time, machining and inspection. At every stage you deal with a process engineer, not a switchboard.

  1. Your move

    Send your model and drawing

    Send a 3D model in STEP format and a 2D drawing in PDF or DXF with tolerances and surface roughness; specify the material and quantity. Only have a sketch or a physical sample? We will scan it and prepare the documentation.

  2. What we do

    Technical review and quote

    A process engineer checks feasibility, selects the machine — a 3- or 5-axis machining center, an automatic lathe, a conventional machine — and suggests changes if they reduce cost. You receive a price per piece and for the full set, and we state the lead time together with the quote.

  3. What we do

    Machining, finishing and inspection

    Once approved, we program the machine, measure the first part on the CMM and start the series. On request, the part goes on to grinding, polishing, engraving or coating — within the same order.

  4. Your move

    Pickup or shipping

    We ship finished parts by courier in protective packaging, or you can pick them up in person in Janikowo near Poznań. An inspection report is included on request.

Send files for a quoteContact details

Questions and answers

FAQ — frequently asked questions about CNC machining and metal cutting

Twelve answers that clear up the start of our cooperation: files, materials, accuracy, prices and lead times. Didn't find your question? Call our machining department or send us a message.

Send files for a quoteAsk your own question

What is CNC machining?

CNC machining is the shaping of a part by cutting material on numerically controlled machines: milling machines, lathes and machining centers. A program guides the tool along a programmed path, so every piece in a series has the same dimensions. This makes it possible to produce shapes that are difficult or impossible to achieve by hand, and to match machining parameters (speed, feed, depth of cut) to the material and the drawing requirements. It is the standard in production for the automotive, aerospace and medical industries.

What are the advantages of CNC machining?

The most important are repeatability and accuracy: the hundredth piece is identical to the first, because the program doesn't get tired and doesn't make mistakes. Once a program is prepared, it shortens machining of subsequent batches, and a 5-axis center produces a part in a single setup, which eliminates repositioning errors. CNC machining covers a wide range of materials, from stainless steel and titanium to aluminum and plastics, and reduces the risk of human error, which translates into the quality of the finished products.

What materials can be machined at ADJATECH?

We machine stainless and acid-resistant steel, aluminum and duralumin, brass, bronze, titanium and engineering plastics. On our CNC machines we also handle materials that are harder to machine, such as those with high hardness or a tendency to work-harden during cutting. We produce both standard machine components and small parts on a CNC micro-milling machine, as well as turning of small parts from 2 mm diameter for the medical, electronics and aerospace industries.

Do you offer custom machining to order?

Yes. We quote every order individually based on the documentation, and we produce prototypes and one-off parts as well as series production. The prototype and the series are made on the same machines, so once the first piece is approved, moving to production requires no change of supplier or technology. Contact our machining department to discuss the details and receive a quote.

How much does CNC machining cost?

The cost depends on the material, the complexity of the part, the required tolerances and finish, the number of pieces, and the number of operations and setups. In a series, the programming and machine setup cost is spread over more pieces, so the unit price drops. We don't publish a price list. We prepare quotes based on a STEP model and a drawing, with a price per piece and per set, and if a design change would lower the cost, we suggest it before production starts.

What is the difference between machining and CNC machining?

Machining is the name of the technology: removing excess material with a tool, including milling, turning, drilling, saw cutting and grinding. CNC machining is the way that technology is controlled: the machine runs a computer program instead of the operator's manual movements. Every CNC machining operation is therefore machining, but not every machining operation is CNC. At ADJATECH we offer both: CNC machining centers and CNC automatic lathes for series and complex geometry, and conventional milling machines and lathes for one-off jobs and part restoration.

What files should I send for a CNC machining quote?

Ideally a 3D model in STEP format and a 2D drawing in PDF or DXF with tolerances, surface roughness and finishing notes. The model tells us what shape to make, and the drawing tells us how precisely. Also include the material, quantity and required lead time. If you only have a sketch or a physical sample, we will scan it with a 3D scanner and prepare the documentation as part of reverse engineering.

Do you perform CNC machining on customer-supplied material?

Yes. We work with material from our own warehouse as well as with blanks, castings or laser-cut blanks supplied by the customer. Before machining, we check the grade, delivery condition and dimensions of the supplied material, because cutting parameters, machining allowances and process safety depend on them. If the material does not allow the drawing dimensions to be achieved, we tell you before starting, not after.

What accuracy does CNC machining at ADJATECH achieve?

The achievable accuracy depends on the part: the material, geometry, clamping rigidity and number of operations. That is why we don't give a single figure for all orders. We verify the tolerances specified on the drawing by measuring on a CMM coordinate measuring machine, and we compare free-form surfaces to the model with a 3D scanner with an accuracy of 0.02 mm. On request, we include a measurement report, and we agree on critical dimensions before the series starts.

What is the lead time for CNC orders?

We set the lead time individually. It depends on the number of pieces, the number of operations, material availability and machine load. We give a specific date together with the quote, always after agreeing it with you, and we stick to the agreed schedule. For larger projects, we plan deliveries in batches, matched to the customer's production.

Do you take CNC orders from companies outside Poznań?

Yes. Our facility is in Janikowo near Poznań, but companies from all over Poland, and beyond, order CNC machining from us. You send the documentation electronically, we handle the quote and technical arrangements by e-mail or phone, and we ship finished parts by courier in protected packaging. Personal pickup at our facility is also possible, Mon–Fri 8:30 a.m.–4:30 p.m.

Does CNC machining also include surface finishing and coatings?

Yes, this is one of the advantages of a department working in the same hall as the laser, the grinding shop and the inspection station. After machining, the part can go on to grinding and polishing (matte or mirror finish), engraving or laser marking, followed by powder coating, chrome plating, gold plating or technical PVD and PTFE coatings. We handle the entire process within a single order, on a single set of documentation, with final inspection on a CMM.

Quote

Get a CNC machining quote: we'll reply with price and lead time

Send a STEP model and a PDF or DXF drawing, and specify the material, quantity and required tolerances. Your inquiry goes directly to the machining department. We reply during business hours, not through a front desk.

Working hours Mon–Fri 8:30 AM–4:30 PMFacility Janikowo near PoznańCoverage all of Poland